Yamaha Black Stainless Prop?

Discussion in 'Vehicles, Boats, Campers, & ATVs' started by Edge650, Dec 19, 2012.

  1. Edge650

    Edge650 Well-Known Member

    Which Yamaha black stainless prop will work best with Tohatsu TLDI 40? I'm looking at the 663-45930-00-98 on boats.net will this one work?
     
  2. Edge650

    Edge650 Well-Known Member

    Nobody's running a Yamaha black stainless prop on a Tohatsu?
     

  3. DARKWING

    DARKWING Well-Known Member

  4. Edge650

    Edge650 Well-Known Member

  5. DARKWING

    DARKWING Well-Known Member

    You might need a 15p. I am bumping the rev limiter with a 14. And I have a heavy boat but it's just right with a load. What are you running now.
     
  6. Edge650

    Edge650 Well-Known Member

    I'm running a 14p reb3. I tried a 15p reb 3 and it was too much.
     
  7. DARKWING

    DARKWING Well-Known Member

    Well you can run the Yamaha prop higher which will be more rpm's but I would try one first before you drop that kinda coin. I have a 14p you can try if your ever in central AR.
     
  8. Edge650

    Edge650 Well-Known Member

    Thanks! PM sent
     
  9. dogfandan_24

    dogfandan_24 Well-Known Member

    I have a tohatsu. Mine likes the 14p black Yamaha. With cup added. Run real high. But its the 10 1/8 diameter. Surface style cut.
     
  10. Edge650

    Edge650 Well-Known Member

    Do you know the part number/model #?
     
  11. dogfandan_24

    dogfandan_24 Well-Known Member

    I don't. But you can search the spline number diameter and pitch and find what you are looking for.
     
  12. Edge650

    Edge650 Well-Known Member

    I don't see a 10-1/8" prop? All Yamaha shows is 10-1/4" and up.
     
  13. Ducks and Dogs

    Ducks and Dogs Well-Known Member

    I don't see a 10 1/8 in the black stainless either???