Plaques fitting for This Website!!

Discussion in 'Deer Hunting' started by GotPork, Dec 2, 2012.

  1. GotPork

    GotPork Select Member<br>Forum Sponsor<br>The Naked Retrei

    I used my first 2 AR plaques on some european mounts and I think I like em....how bout yall??
    [​IMG]
    [​IMG]
     
  2. Those look great brother
     

  3. 10pointman

    10pointman Moderator Staff Member

    Lookin good!

    Sent from my DROID RAZR using Tapatalk 2
     
  4. btech29

    btech29 Well-Known Member

    Nice work Porky.
     
  5. Razorback123

    Razorback123 Super Member<br>The Original BBDH

  6. Mr. Chitlin

    Mr. Chitlin Administrator Staff Member Supporting Member

    72,726
    91,235
    NE Ark
    I like 'em a lot!! :thumb:
     
  7. mikebri

    mikebri Well-Known Member

  8. JasonS

    JasonS Well-Known Member

    That is sharp!! I wish I had something to bring you.
     
  9. browning_gold_12

    browning_gold_12 Moderator<br>Deer Hunting<br>Trail Cameras<br>'07

    7,382
    2,188
    camden
    Been doing state plaques for years. Get some oak from your local lumber yard. Board needs to be minimum 9.5'' wide. Make a few more twists and turns on the MS side, gives each plaque a lil character. Also, the grain looks better to me running vertical.

    [​IMG]
     
  10. GotPork

    GotPork Select Member<br>Forum Sponsor<br>The Naked Retrei

    Thanks everybody and bg12 those look cool.....I might have to check out some of that oak wood!!
     
  11. jack03111969

    jack03111969 Well-Known Member

    looks good......................:up:
     
  12. mwmwbm

    mwmwbm Well-Known Member

    looks good, GP. only downfall is the plate is blocked.
     
  13. RAZOR_DEER

    RAZOR_DEER Well-Known Member

    Looks great, it never ceases to amazme the creativity of the folks on this forum!
     
  14. The Iceman

    The Iceman Member<br>2012-13 Bowhunting Contest Winner

    My friends will be happy! Good job man!
     
  15. Draftstud

    Draftstud Well-Known Member

    [​IMG]

    I made the above Plaque out of wood then I used that rattle can Rock Finish Paint. It really turned out great, folks really thought it looked and felt like stone. I used a couple of Mule Shoes welded together and a piece of Flatstock bent over a 4" PCV pipe to curve up behind it, giving the young boy from Texas a unique Pedistal Plaque. John
     
  16. bottomlands

    bottomlands Well-Known Member