Arkansas Hunting banner

charles daly

1005 Views 12 Replies 7 Participants Last post by  treecop812
My son bought me a charles daly 20.ga. pump its a little short in the stock any suggestion on how to lengthen it (please not buy pulling on both ends) would apprecate it thanks
1 - 13 of 13 Posts
How about adding a recoil pad?
(please not buy pulling on both ends)
:smack: There goes my idea....


recoil pad. :thumb:
thats the only way i'm going to get it just right i think do they come in certan lenghtens or all they all standard
Most of the good ones are about an inch or so thick. Do you need more than that??
:thumb: that would be getting it close i'll give it a try thanks just thought there mite be a differnt way to go about it sure didn;t want to pull on both ends
im not much on a shotgun but my eyes are getting old and those little old grey squrriels are getting quicker:thumb:
looks like it will work thanks john. Ill give it a try:thumb:
wash yourself in hot weater, jump in clothes dryer for 3-5 hrs. g
Get out and try shotgun. You should have shrunk enough for it to fit nicely. :thumb: :thumb:
wash yourself in hot weater, jump in clothes dryer for 3-5 hrs. g
Get out and try shotgun. You should have shrunk enough for it to fit nicely. :thumb: :thumb:
ok! tried that!! now it's to long and i can't reach the pedals in my jeep thanks for reply
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top