[conwayhunter]

Ok Guys I have a 04 Bass tracker 18.5 aluminum boat. It has a dent in the bottom on the under side that's causing the boat to pull to the left really bad. Any ideas on how to pop this dent out? Or can you fill it in ?

 

[SCDuck]

Remove the interior have some one underneath with a body block and beat it out. I did the same thing with a 19 ft bass boat a couple yrs back

 

[dirtdart]

Sounds like we have the same boat. SCDuck has the answer. I used a auto-body dolly kit to do the same thing.

 

[conwayhunter]

Is the floor just held in with screws? I don't have access to any auto body tools. Would a rubber mallet work ?

 

[SCDuck]

Yes the interior is screwed in, most of the time the carpet covers the screw heads it'll take a little looking. A rubber mallet wouldn't work for me I had to use a small sledge hammer. You can get the blocks from an automotive parts/ paint store. I wouldn't try it without it.

 

[conwayhunter]

Ok thanks. I really need to do this I am tired if fighting the pull on this thing.