[4hunting]

I have a full set of 28" GBC Gator's that are allready mounted on custom 12" Vision rims. They were bought for a Honda but also have the same bolt pattern that will fit a Yamaha or Suzuki. They were bought new last year & ran for the last half of duck season then pulled off. They were never even put on this year. All the tires have been treated with Flatgaurd sealant when mounted.

The set new was over $850 new plus the cost of the sealant at another $15 a tire. The tires may require a lift kit to be installed on some applications to get the needed clearance. I also have the $120 lift kit that came off the machine in which the tires were bought for. It will fit a Honda Rubicon. When they were mounted on the machine with the lift kit installed the bike had 19" of ground clearance measured at the foot pegs.

I will take $600 for the set of tires & rims already mounted & with the sealant installed. If someone happens to need the lift kit for a Rubicon I will take $60 for it.

Shoot me a PM if interested!


Here is a link to a photo of what the rims look like:
http://www.powersportsnetwork.com/e...&product=188056&cattype=&ProductCategoryCode=

Here is a photo of the tires that are mounted on the rims:

 

[thethrill]

Them Gators are Awesome tires!!!

 

[Rocketman]

What year model was the bike the lift was on?

 

[4hunting]

What year model was the bike the lift was on?

The lift kit was installed on a 2002 TRX500FA Rubicon. It will fit all 500Rubicon models 2001 to present production and will also fit the new TRX 500 Foreman's 05- present also.

I will sell the lift kit with the tires if someone needs it for the application, or I will sell it after the tires are sold seperatly to someone if they need just it! Need to hang on to it until the tires are gone!

 

[4hunting]

Thought I would bump this back up again. Noticed some people were asking about some ATV tires that have been listed. I still have these if anyone is in need of them at a savings! I have $900 invested in them & will sell them for $600, 2/3rd's the price of need!

 

[Arkie_3_fan]

I sure wish those tires were 27" and mounted on wheels to fit an IRS machine. I'd be all over them.