Need help please....

[bluecat713]

Where can i buy a sheer pin for a MinnKota trolling motor?

[reflex1]

Probably some sporting goods store in your area!

[Arkie_3_fan]

mikesreelrepair.com is one of a few online places with trolling motor parts.

[octoberbuck]

H2O Sports in North little Rock has a trolling motor repair shop. I think they also do Minnkota Warranty work.

[faithfularcher]

usually when you buy a new prop it comes with a pin . I also have used other things like a 8penny nail just cut it the right length to fit , hope this helps

[John Stiles]

usually when you buy a new prop it comes with a pin . I also have used other things like a 8penny nail just cut it the right length to fit , hope this helps

I was thinking more like copper wire.....I can make ya one outta brass rod...from 1/16th" up to 1/4". That help?:thumb:

[BassnBucks]

Wal-Mart usually has a kit with two pins, two washers and a plastic nut for around 5 bucks. Look near their trolling motors.

Whenever I went to a boat dealer or something like that they wanted 3 bucks each for the pins.

[peewee]

Take your sheared pin pieces to a local hardware or parts store and look for smooth key stock. I got some at our local NAPA for about $1 and was enough for about five pins.

[buck1]

welding rods work great, just nock the flux off

[BuzzBait]

We have picked some up at Wal-mart before...I sure you have already tried that though..

[tfort]

ive used welding rods in a pinch